Useful Console Commands (Killing Floor 2)

These are console commands for PC version of Killing Floor 2.

Introduction

• While playing in game or within Play in Editor, press ~ to open the console window. F3 also pulls up a lightweight console.
• Console commands are not case-sensitive.

Core Commands

Command	Function
Open <Map Name>	Will load the map given. Eg: open kf-burningparis You can also load gamemodes and mutators at the end of the command eg: kf-burningparis?Game=KFGameContent.KFGameinfo_Survival Command as well accepts short names for gamemodes: "Survival", "Weekly", "Versus" or "Endless" and difficulty / game length specificators, e.g. Open KF-Farmhouse?Game=Endless?Difficulty=2?Gamelength=1 where Difficulty: 0 - Normal, 3 - HOE and Gamelength: 0 - short, 2 - long.
Open <IP>	Will connect to the <IP> given You can provide a password. eg: open 127.0.0.1?password=123 And you can also join as spectator. eg: open 127.0.0.1??spectatoronly=1
Disconnect	Leaves the current session (good if you are stuck on a screen)
Reconnect	Rejoins the current session you are in
Suicide	Causes your player to die
RestartLevel	Restarts the Level
ToggleScreenshotMode	Toggles Weapons/Hands and HUD on and off.
ToggleHUD	Toggles HUD

Gameplay Commands

• All these commands require you to 'enablecheats' and will derank a play session.
• As a server owner, it requires you to add 'admin' prefix prior to each command. After login as an administrator. See admin commands.
• Unintended game behaviour might appear while executing these commands online, with other players on server. For testing purposes better try solo play.
• To go into 3rd person once enablecheats are on press 3 on the number pad (1 is 1st person).

Command	Function
EnableCheats	Will open up the majority of commands for you to use
God	Toggles God Mode
Demigod	Toggles Demi-God Mode (will take damage but not die)
HurtMe <AMOUNT>	Causes AMOUNT of the damage to player, e.g. HurtMe 20
HealMe <AMOUNT>	Heals player for AMOUNT of the health
ArmorMe <AMOUNT>	Gives player AMOUNT of the armor
Ghost	Allows basically no-clip mode
Fly	No-clip with collision and interaction
Walk	Allows you to disable Ghost/Fly and walk again
ImRich	Gives loadsamone
DoshMe <AMOUNT>	Gives you the amount of dosh given
UberAmmo	Gives lots of ammo for all weapons/grenades
Loaded	Gives you most of the weapons
GiveWeapon <WeaponClass String>	Gives a specific weapon using class name & location eg: giveweapon KFGameContent.KFWeap_Shotgun_DoubleBarrel List of Weapon Class Names
UpgradeWeapon	Upgrades currently equipped weapon one level
OpenTraderMenu	Open buy menu, anywhere, anytime
DramaEvent <CHANCE> <LENGTH>	Chance to toggle Zed Time with colour grading. eg: dramaevent 1 10 - will give 100% chance to trigger Zed Time for 10 seconds when entered.
Slomo <SCALE>	Sets world speed. Also useful to test ZED Time skills - they all become active with Slomo < 1 (e.g. Slomo 0.99)
ChangeSize <SIZE>	Changes player size/scale. Default is 1.
SetSpeed <SPEED>	Changes walk speed. Default is 1
SetJumpZ <HEIGHT>	Changes Jump Height.
SetGravity <GRAVITY>	Changes Gravity. Default is -1150 (negative value). This can easily crash a game or server, stay in reasonable numbers and don't go into positives.

Weapon Class Names

Weapon	Class Name
Double Barrel Shotgun	KFGameContent.KFWeap_Shotgun_DoubleBarrel
Zweihander	KFGameContent.KFWeap_Edged_Zweihander
Road Redeemer	KFGameContent.KFWeap_Blunt_ChainBat
Ion Thruster	KFGameContent.KFWeap_Edged_IonThruster
Rhino	KFGameContent.KFWeap_Pistol_ChiappaRhino KFGameContent.KFWeap_Pistol_ChiappaRhinoDual

Spawning and AI Commands

• All commands require enablecheats

Command	Function
SpawnHumanPawn <ISENEMY> <GODMODE> <INDEX>	Spawns braindead dummy player. Does not have AI, attracts ZEDs, takes damage from ZED and player's attacks unless GOD mode set ON: SpawnHumanPawn 0 1 0.
KillBots	Kills all entries of SpawnHumanPawn
SpawnZed ZedName[String]	Will Spawn Braindead Zed of type given: eg: spawnzed sc
SpawnAI ZedName[String]	Will spawn Zed with AI
SpawnZedGroup ZedName[String] NumRows[Int] NumCols[Int] Spacing[Float]	Spawns Braindead Zeds in given rows and columns
SpawnZedAIGroup ZedName[String] NumRows[Int] NumCols[Int] Spacing[Float]	Spawns Zeds with AI in given rows and columns
KillZeds	Kill all ZEDs on the map - AI and dummies.
PlayersOnly	Pauses game, but allows players to move around. Pressing F4 also works.
SpawnZEDV <ZEDNAME> <SHOULDPOSSES?>	Requires Versus game to be loaded first, e.g. open KF-Lockdown?Game=Versus Spawns braindead Versus ZED. Add 1 to specify if player should take control over this ZED: SpawnZEDV Siren 1

Zed Codes

ZedName Code	Zed	ZedName Code	Zed
ClotA	Alpha Clot	Hans	Hans
ClotS	Slasher	Pat	Patriarch
ClotC	Cyst	KingFP	King Fleshpound
EAlp	Rioter	MiniFP	Quarterpound
B	Bloat	KingB	Abomination
G	Gorefast	Poop	Abomination Spawn
GF2	Gorefiend
Cr	Crawler	emp	EDAR Trapper
ECra	Elite Crawler	laser	EDAR Blaster
St	Stalker	rock	EDAR Bomber
Hu	Husk
Si	Siren
Sc	Scrake	FHans	Friendly Hans
FP	Fleshpound	FHusk	Friendly Husk

Admin Commands

• The use of gameplay commands (god, ghost, slomo, etc) require you to prefix commands with 'admin' after logging in and enabling cheats.
  • eg: admin god, admin slomo 0.5 or admin setfriendlyfirescale 0.25

Command	Function
AdminLogin <PASSWORD>	Login as admin
AdminLogout	Logout as admin
Pause	Will pause the game instance
SetFriendlyFireScale FFScale[Float]	Sets friendly fire scale for the server. Will keep server ranked.

Useful SDK Commands

Command	Function
ToggleSpawning [1]	Allows you to test the game in PiE. Zed replacement optional is non-functional. Toggling also allows you to skip waves. Testing for Holdout maps requires you to enter trader first before Toggle-Skipping
EndCurrentWave [1]	Will complete the current wave and move to trader
SetWave <WaveNumber> [1]	Sets the wave to the specified number
Chris	Gives God, Loaded, UberAmmo, ToggleSpawning
ToggleSplatterGun	Toggles the ability to spray splats on the map. Make sure to disable before exiting SDK.
ClearSplatters	Clears all splats off the map
ClearCorpses	Clears all corpses off the map
DisableAllScreenMessages	Turns off errors in PiE
HideTraderPath	Turns off Trader Path
ShowTraderPath	Turns on Trader Path
TestPortalNearby <ZedName> <NumSpawns>	Forces a spawn from the closest portal spawn
TestPortalAll <ZedName>	Forces a spawn from all portals
TestPortalActive <ZedName>	Forces a spawn for active portals
TestSpawnVolume <SpawnAmount>	Forces the closest spawn volume to spawn Active Zeds
SetSpawnVolumeDebug <bSpawnDebug> <bDebugRating> <bDebugVisibility>	Enables SpawnVolume debug values. eg: just use - setspawnvolumedebug true true true
SpawnTest <SpawnAmount> <bSimSpawn> <bSpawnZeds>	Well do a test Spawn based on current user position and volume values. Use in conjuntion with the above command eg: spawntest 4 true false - will test the spawns but not spawn anything
ShowPrecomputedVisibility	Will show the Precomputed Visibility cells if PCV have been built
ToggleOcclusion	Toggles the Dynamic Occlusion System
TogglePrecomputedVisibility	Toggles Precomputed Visibility

[1] Only available in SDK/Editor

Debug Commands

Command	Function
Stat FPS	Displays FPS and frame render time
ShowLog	Shows Debug Log
BugIt <DESCRIPTION>	Creates a screenshot with accompanying .txt file with comment, map location and build. Located at: Documents > My Games > KillingFloor2 > KFGame > Screenshots
GetAll <ClassName> <PropertyName>	Prints out property value of all instances of specified class in console. E.g. GetAll KFPawn_ZedScrake Health will print out health of all Scrakes on the map in console. Can only print out global variables and variables that are replicated from server to clients.
DisplayAll <ClassName> <PropertyName>	Same as GetAll but processes data and displays it on screen in real time. Warning - resource intensive procedure. Does not work online.
DisplayClear	Clears all DisplayAll entries.
Show COLLISION	Toggles collision rendering. Useful to examine map / object bounds. Offline only.
Show VOLUMES	Toggle Volumes.
Show SPAWNVOLUMES	Toggle ZED spawn points rendering. Offline only.
Show HITZONES	Toggle ZED's hitzones. Offline only.
ShowDebug Weapon	Useful onscreen weapon data including animation timers for reloading or melee.
NoSpread or GoSpread	Turns random bullet spread of current weapon OFF or ON.
NoRecoil or GoRecoil	Turns recoil of current weapon OFF or ON.
SetNadeRadiusDebug 1	Draws radius of the current explosion in the world. 3 spheres shown each time: Yellow - maximum radius of the explosion Red - Clot kill radius (radius where it does 100+ damage) Orage - half falloff radius (radius where it does 50% or more of its initial damage). Command does NOT imply perk bonuses (rather works with explosion's default values).
TestNukeGrenade	Throws a grenade that will create a Nuke

Input Commands

Command	Function
SetBind <Key> <Command>	Binds command to a key. E.g. SetBind "K" "TossMoney" Common commands: Jump, StartCrouch, StopCrouch, ToggleCrouch, IronSights, IronSightsRelease, ToggleFlashlight, SelectNextWeapon, SelectPrevWeapon, SelectLastWeapon, SwitchWeaponGroup [1-4], QuickEmote, QuickHeal, TossMoney, Interact, StartVoiceChat, StopVoiceChat
Executing multiple commands with "|"	Allows to execute multiple commands in one go E.g. SetBind K "TossMoney | TossMoney | TossMoney" will allow user to toss 150 Dosh (3 times 50)
OnRelease event	Allows to execute additional command on button release. E.g. SetBind H "slomo 25 | OnRelease slomo 1". For the duration of H button hold world time will speed up by 25 times, but on release it will return back to normal speed.