Welder (Killing Floor 2)
Killing Floor 2 item | |||
Welder | |||
MAGAZINE SIZE | 100 | ||
SPARE AMMO CAPACITY | infinite | ||
• "You can <WELD DOORS> to slow the flow of enemies to a given area. To weld a door, walk up to it and <HOLD USE> to equip your welder." | |||
Weapon Information | |||
Full Recharge Time | 8s | ||
Related Achievements | |||
In Killing Floor 2 every player equipped with the Welder - a personal hand-held rechargeable equipment that allows players to seal up doors. On top of that in hands of Support Welder becomes a repairing tool allowing them to repair completely broken doors.
Description
"You can <WELD DOORS> to slow the flow of enemies to a given area. To weld a door, walk up to it and <HOLD USE> to equip your welder."
Technical Information
Ammo Capacity = 100.
Ammo Consumption (per use) = 7.
Recharge Time (one point per each) = 0.08s.
Full Recharge Time = 8s.
Fire Rate = 300 RPM.
Equip Time = 0.33s.
Putdown Time = 0.42s.
Player welding doors at rate of +68 points of Weld Integrity / attack and un-weld it at rate of -110 points of Weld Integrity / attack. These values boosted by Support's passive ability up to (+102 / -165). Door being completely shut when it has 1500 points of Weld Integrity on the counter.
If door is under attack Welder will be restoring only 60% of normal amount of HP that it could restore per single attack.
Support can repair doors at rate of 7 points / welder attack. Door will be restored upon accumulating total of 255 points.
Strategy
Don't forget to maintain the weld integrity - big ZEDs do a lot of the damage to doors.
Be prepared: make sure that you have "Show Welder In Inventory" option turned ON. Approaching to the door while holding the Welder would save you a second as you wouldn't need to spend the time pulling it out.
As a Support don't forget to repair destroyed doors during the Trader time. If you have a Demolitionist in the team as them to set up Door Trap - so if the door will go down it will go down LOUD!
Gallery
-
Artbook concept
-
Artbook renders